Signify started rolling out version 6.5.0 of the Philips Hue app on 11 November 2026, first on iOS. The update does two things for the mains-wired wall switch modules Hue launched in June: the on/off modules can now take part in MotionAware, and all three modules get extra device modes. Smarthomeassistent spotted the release on the day, and Hueblog followed on 13 November.
MotionAware with an ordinary ceiling light
MotionAware turns Hue devices into motion sensors. It measures how people disturb the Zigbee signal travelling between devices in a room and switches the lights when it sees movement. It needs the Hue Bridge Pro, and the older bridge will not get it through an update. A motion area needs at least three compatible devices spread around the room.
Until now, the only wired module that counted was the one meant for Hue lights. Version 6.5.0 adds the 1-channel and 2-channel on/off modules, the relays that make an ordinary ceiling light switchable. Because they sit permanently on mains power and act as Zigbee routers, they transmit all the time, which is what MotionAware needs. Per Hueblog, one module plus two other Hue products in the same room is enough for a motion area. In practice, a hallway with a classic ceiling lamp on a 1-channel module and two Hue bulbs could switch on movement without a separate motion sensor. Hue does not mention the dimmer module in this context.
New device modes
The second change is in setup. The two on/off modules and the 1-channel dimmer module get more device modes. Smarthomeassistent notes that Hue's release notes do not list them. Hueblog describes two uses: a module can control lights without a physical switch connected to it, or it can keep a smart bulb permanently powered while the wall switch only sends commands to Hue lights. The second mode removes the classic problem of someone flipping the switch and cutting power to a smart bulb.
What you need
The modules go behind an existing switch or in the ceiling above the light. They need a neutral wire in the box, and the 1-channel module is rated for a 6 A lighting load. They work with rocker, toggle and push-button switches, but not with rotary dimmers or switch-socket combos. Since they are connected to 230 V, an electrician is the sensible choice for installation.
The update is free. In the German Hue store the modules cost 49.99 euros (1-channel), 54.99 euros (2-channel) and 59.99 euros (dimmer), and the Bridge Pro is 149.99 euros. Using MotionAware for lighting costs nothing extra, while using it in Hue Secure needs a paid plan. When the update arrived, it was not clear whether the Android version was rolling out at the same time.
This is the third motion-related update in about four weeks. App 6.3 in mid-October added scenes triggered when motion stops, and 6.4 in late October brought AI-built automations for the Bridge Pro that can use sensors and motion areas as triggers.