The Matter and Thread features that arrived in UniFi Network 11 have reached Ubiquiti's phone apps. UniFi for Android 11.2.1 came out around 11 November 2026, and UniFi for iOS 11.1.0 followed on 12 November. Until now, adding a Matter device to UniFi meant using the Network application in a browser. Now it can be done from a phone, including by scanning the QR code.
What the apps add
The iOS release notes describe "Matter and Thread support, including QR code pairing, client details, Topology, Insights, and a channel map". The Android notes are more specific:
- a new Matter section in Settings for viewing Thread networks, managing Matter devices and commissioning new ones;
- client details for Matter-over-Thread devices;
- a prompt to turn IPv6 on if it is disabled when you start commissioning a Matter device.
The IPv6 prompt is the most practical part. Matter needs IPv6 and mDNS, and many people switch IPv6 off on their IoT network. Without it, Thread devices simply did not show up in UniFi, and the app now points that out at the right moment.
UniFi is an extra controller, not the main one
As in the network application, UniFi does not replace Home Assistant, Apple Home, Google Home or an IKEA DIRIGERA hub. It works as an additional Matter controller and uses that access for monitoring: device details, signal quality and position in the topology. LazyAdmin's guide explains the usual order. A brand-new device is first commissioned in your main controller, which then generates a one-time sharing code, and you enter that code in UniFi under Settings > Matter > Add Device. You do not switch lights or build automations in UniFi.
There are still rough edges. One Android user noted in the release thread that the Matter list shows all devices but not the connection type for Matter over Wi-Fi. A commenter under LazyAdmin's guide reported on 13 November that the feature works on UniFi Cloud Gateway models but not on a setup with a UXG-Lite gateway and a Cloud Key Gen2 Plus. Ubiquiti has not confirmed that limit.
Other changes
Both apps have a long list of networking changes. The iOS version adds a routing table view (static routes, policy-based routing, BGP and OSPF), Wi-Fi uplink, WAN over a VLAN bridge, multiple link aggregation groups, port VLAN settings, a Management zone in firewall policies and 25 bug fixes. The Android version adds Wi-Fi uplink, custom client icons that can be generated from a photo, and IPv6 on a single network.
If you already added Matter devices through the browser, nothing changes on the network side. The apps simply let you check a Thread device that dropped off, or add a new one, without opening a laptop.